|
General Bearing Freight
Car pins are precision manufactured to provide accurate
size, maximum strength, and long service life at an
economical cost. These pins were developed especially
for the railroad Freight Car  market.
In the manufacturing process turned and ground high-grade
high carbon steel (SAE-1050) stock is cut to length
and chamfered. The head is hot-formed, the bearing area
is induction hardened; and the cotter pin hole is drilled
and chamfered to prevent shearing of the cotter pin.
Special coatings will be considered for your requirements.
Our selective scanning induction hardening process hardens
the bearing surface to a depth of 1/8 inch for superior
wearability. The core, head, and cotter pin areas are
refined and ductile for maximum strength. All the pins
listed are carried in inventory ready for immediate
shipment. If the size you need is not listed, we can
make it to your specifications. Give
us a call.
| 1 | 3-1/3 | 2-5/8 | 1-5/8 | F10931 | 8021 | | 1 | 3-3/8 | 2-7/8 | 1-5/8 | F10897 | 8020 | | 1 | 3-3/4 | 2-9/32 | 1-/5/8 | | 8066 | | 1 | 4-3/8 | 3-7/8 | 1-5/8 | F10896 | 8017 | | 1 | 5-3/8 | 4-7/8 | 1-5/8 | F10895 | 8022 | | 1 | 7 | 6-3/8 | 1-3/4 | | 8054 | | 1-3/32 | 2 | 1-3/16 | 1-5/8 | f11370 | 8023 | | 1-3/32 | 2-5/8 | 2 | 1-5/8 | f11371 | 8025 | | 1-3/32 | 2-1/2 | 2-1/16 | 1-5/8 | f11305 | 8024 | | 1-3/32 | 2-3/4 | 2-1/8 | 1-5/8 | f11323 | 8049 | | 1-3/32 | 3-1/8 | 2-1/2 | 1-5/8 | f8563 | 8026 | | 1-3/32 | 3-1/4 | 2-3/4 | 1-5/8 | f5008 | 8027 | | 1-3/32 | 3-1/2 | 3 | 1-5/8 | f5009 | 8028 | | 1-3/32 | 3-7/8 | 3-1/4 | 1-5/8 | f10595 | 8029 | | 1-3/32 | 4 | 3-1/2 | 1-5/8 | f5010 | 8030 | | 1-3/32 | 4-1/4 | 3-11/16 | 1-5/8 | f10981 | 8014 | | 1-3/32 | 4-1/2 | 4 | 1-5/8 | f5011 | 8048 | | 1-3/32 | 5-1/8 | 4-1/2 | 1-5/8 | f8566 | 8031 | | 1-3/32 | 5-3/8 | 4-3/4 | 1-5/8 | f9430 | 8032 | | 1-3/32 | 5-5/8 | 5 | 1-5/8 | f9431 | 8033 | | 1-3/32 | 6 | 5-3/8 | 1-5/8 | f9432 | 8034 | | 1-3/32 | 6-1/4 | 5-5/8 | 1-5/8 | f10918 | 8013 | | 1-3/32 | 6-1/2 | 5-7/8 | 1-5/8 | f9450 | 8010 | | 1-3/32 | 6-5/8 | 6-1/16 | 1-5/8 | f10725 | 8015 | | 1-7/32 | 3-5/8 | 3 | 1-7/8 | f8565 | 8038 | | 1-7/32 | 3-7/8 | 3-5/16 | 1-7/8 | f8880 | 8039 | | 1-11/32 | 3-9/16 | 3 | 1-7/8 | f9793 | 8040 | | 1-11/32 | 3-7/8 | 3-1/4 | 1-7/8 | f10397 | 8047 | | 1-11/32 | 4-1/4 | 3-1/2 | 1-7/8 | f5521 | 8041 | | 1-15/32 | 3-7/8 | 3-11/32 | 2 | f8497 | 8042 | | 1.464 | 4.125 | 3.500 | 2 | | 8059 | | 1-15/32 | 5-1/2 | 4-7/8 | 2-1/4 | | 8065 | | | | | | |
|
 At
our customer’s request, General Bearing will supply
parts heat treated to AAR standards.
Additional variations in “A”, “B”
and “C” dimensions are available to meet
your requirements.
For use with:
-Grade C couplers,
BHN 185 minimum
-Grade E couplers, quenched and tempered BHN 262-302
(identify with a 1/2” letter “E”
stamped top and bottom of head)
| 1650-a | 16-1/2 | 1-1/2 | 1-9/16 | | 1675-a | 16-3/4 | 1-1/2 | 1-9/16 | | 1700-a | 17 | 1-1/2 | 1-9/16 | | 1725-a | 17-1/4 | 1-1/2 | 1-9/16 | | 1750-a | 17-1/2 | 1-1/2 | 1-9/16 | | 1775-a | 17-3/4 | 1-1/2 | 1-9/16 | | 1800-a | 18 | 1-1/2 | 1-9/16 | | 1825-a | 18-1/4 | 1-1/2 | 1-9/16 | | 1850-a | 18-1/2 | 1-1/2 | 1-9/16 | | 1875-a | 18-3/4 | 1-1/2 | 1-9/16 | | 1900-a | 19 | 1-1/2 | 1-9/16 | | 1925-a | 19-1/4 | 1-1/2 | 1-9/16 | | 1950-a | 19-1/2 | 1-1/2 | 1-9/16 | | 1975-a | 19-3/4 | 1-1/2 | 1-9/16 | | 2000-a | 20 | 1-1/2 | 1-9/16 |
|
tapered
on one end
| 1-3/4” x 15” | 7860 | | 2” x 15” | 7841 | | 2” x 16” | 7882 | | 2” x 18” | 7877 | | 2” x 20” | 7883 |
|
| AAR Specification |
M-118-00 |
| Steel Grade: |
AISI C-1060 |
| Quench and Temper : |
262-302-BHN |
|
General Bearing No. 7705
|
